Medtronic SYNCHROMED EL serie Gebrauchsanweisung Seite 50

PHM036En2.qxd 2/16/00 12:03 PM Page 41
Table 6. Pump specifications for 18 ml pump models.
External properties
Material
Thickness
Weight (empty)
Displacement volume
Diameter (without silicone
rubber surface pad)
Diameter (with integral
access port)
Drug Reservoir
Material
Usable capacity
Residual Volume (Dead space)
Reservoir Valve
Material
Internal tubing
Material
Volume of fluid path
between reservoir and
catheter port (tip)
Fill port (septum)
Material
Puncture life (22-gauge
Huber-type needle)
Side catheter access port
Material
Prime volume
Recommended injection rate
Septum puncture life (25-
gauge needle)
Power source
Battery
Deliverable capacity
Voltage
Life
Fluid output
Leakage (stopped pump)
1
Infusion rate (min)
2
Infusion rate (max)
Bacterial retentive filter
Material
Pore size
1
At rates less than 0.048 ml/day, the flow accuracy may exceed the ± 15 percent specification.
2
Actual limits depend on pump calibration constant and selected infusion mode. The programmer may
further narrow these limits.
Medtronic - Kerkrade / PARTNUMBER :
Models 8626-18 Models 8627-18
and 8626L-18 and 8627L-18
Titanium Titanium
27.5 mm (1.08 in) max 27.5 mm (1.08 in) max
185.0 g (6.5 oz) max 205 g (7.2 oz) max
107.0 ml max 125.0 ml max
70.4 mm (2.77 in) max 70.4 mm (2.77 in) max
85.2 mm (3.35 in) max 85.2 mm (3.35 in) max
Titanium Titanium
18.0 ml 18.0 ml
2.4 ml max 2.4 ml max
Titanium Titanium
Silicone rubber/titanium Silicone rubber/titanium
0.23 or 0.32 ml 0.26 or 0.36 ml
Refer to Table 8. Refer to Table 8.
Silicone rubber Silicone rubber
500 punctures 500 punctures
Not Applicable Silicone rubber/titanium
0.4 ml
15 ml/minute max
saline/drug; 3 ml/minute
radiopaque compounds
2000 punctures
Lithium thionyl-chloride Lithium thionyl-chloride
2.0 Amp Hours (nominal) 2.0 Amp Hours (nominal)
3.6 Volts (nominal) 3.6 Volts (nominal)
Rate dependent, see Rate dependent, see
longevity graph longevity graph
0.005 ml/hour max 0.005 ml/hour max
(.120 ml/day) (.120 ml/day)
0.048 ml/day 0.048 ml/day
0.9 ml/hour (average for 0.9 ml/hour (average for
Simple Continuous Mode) Simple Continuous Mode)
Polymeric Polymeric
0.22 micron 0.22 micron
198076-036 SHEETNR. :
Specifications 41