HP CM8060 Color MFP Kundendienst Handbuch Seite 1522

C7.0B53: Bonding Agent supply is non-HP
Initial Steps
1. Check the supply status screen for the appropriate Bonding Agent cartridge and look for an HP icon next to the cartridge name and an
Bonding Agent level indicator. If the HP icon and the Bonding Agent level indicator are displayed, this is an original HP Bonding Agent
cartridge.
Check for a non-HP cartridge message
1. Look for a message indicating that an Bonding Agent cartridge is non-HP and that the associated color has not been enabled for non-
HP Bonding Agent displayed on the control panel.
Is such a message displayed?
No Yes
Verify the administrator settings
1. Check the administrator settings and make sure the Non-HP Bonding Agent cartridge setting is enabled.
1 HINWEIS:
Review the Event Log
1. Check the Event Log for any Bonding Agent cartridge related codes.
1456 Kapitel 8 Hardware fault trees
Using non-HP Bonding Agent could result in an image quality problem.
DEWW