HP CM8060 Color MFP Kundendienst Handbuch Seite 1501

1 2 3
1 2 3
Replace the acumen cable
1 2 1. Replace the acumen cable to the ink cartridge that is indicated to have the broken bag.
Reinstall the ink cartridges
1 1. Reinstall the ink cartridges.
Look for leaking ink
1. Check the IDS and the entire length of the ink tubes for leaking ink.
Is there leaking ink?
No Yes
Replace the IDS assembly
1. Replace the IDS assembly.
1 „IDS-Einheit" auf Seite 603
Test each ink cartridge
1. Determine which ink cartridge is the emptiest or the latest installed, and then replace this ink cartridge with a new ink cartridge of the
same type.
2. Pressurize the IDS.
3. Track the time it takes for the IDS to depressurize.
HINWEIS: Do not depressurize the IDS yourself. Allow the pressure to decay as the IDS is idle.
4. Repeat steps 1 to 3 for each ink cartridge. If the time for the pressure to decay significantly lengthens, then the ink cartridge you just
replaced was the source of the leak. For example, if you replace the cyan cartridge and the time for the pressure to decay doubles,
then the cyan cartridge was the source of the leak.
HINWEIS: If an ink cartridge is the source of the leak, replace that ink cartridge only. You can reinstall any original ink cartridges that
you removed during this test.
Was an ink cartridge the source of the leak?
No Yes
1 „Final activities" auf Seite 24
Replace the IDS relief valve
1. Replace the relief valve.
„IDS-Überdruckventil" auf Seite 618
2. Pressurize the IDS, and then track the time it takes for the IDS to depressurize. If the time for the pressure to decay significantly
lengthens, then the relief valve was the source of the leak.
Was the relief valve the source of the leak?
No Yes
DEWW
Replace the ISS PCA (A8)
1. Replace A8.
4 „ISS PCA (A8)" auf Seite 621
Replace the acumen cables
1. Replace the acumen cables one-by-one until the broken bag indicator clears.
C7.0B08: IDS leak detected 1435