HP CM8060 Color MFP Kundendienst Handbuch Seite 1248

●
A1.02EF: Close right-side lower panel
●
A1.06C1: Right-side Lower Panel LED (LED18) not lit
●
A1.06C2: Tray 2 LED (LED15) not lit
● A1.06C3: Tray 3 LED (LED16) not lit
●
A1.06C4: Tray 4 LED (LED17) not lit
●
A1.0701: Trays 2, 3, and 4 Controller PCA (A23) failure
●
A1.07A1: Trays 2, 3, and 4 Controller PCA (A23) voltage out-of-range
●
A1.1302: Paper jam at Tray 2
●
A1.1304: Paper jam at Tray 4
●
A2.0101: Tray 5 Pick motor (M101) stall
●
A2.0102: Tray 5 Elevator motor (M102) stall
●
A2.0201: Tray 5 Elevator Upper Limit sensor (SN108) failed
●
A2.0202: Tray 5 Stack Height sensor (SN104) failed
● A2.02C2: Elevator does not go all the way to the bottom
●
A2.02E1: Reattach Tray 5
●
A2.02E3: Close Tray 5 top-left panel
●
A2.02E4: Close Tray 5 top door
●
A2.02E5: Tray 5 overfilled
●
A2.02E6: Tray 5 empty
●
A2.06C1: Tray 5 Top Door LED (LED102) not lit
●
A2.06C2: Tray 5 Top-left Panel LED (LED101) not lit
●
A2.1301: Paper jam at Tray 5 Media 1 sensor (SN101)
● A2.1302: Paper jam at Tray 5 Media 2 sensor (SN103)
● B0.0101: Vertical motor (M6) stall
●
B0.02E1: Close right-side upper panel
●
B0.02E2: Close right-side middle panel
●
B0.06C1: Right-side Middle Panel LED (LED13) not lit
●
B0.1301: Paper jam at Vertical Transport 1 sensor (SN35)
●
B0.1302: Paper jam at Vertical Transport 2 sensor (SN28)
●
B0.1303: Paper jam at Vertical Transport 3 sensor (SN25)
●
B0.1304: Paper jam at Vertical transport 4 sensor (SN26)
1182 Kapitel 8 Hardware fault trees DEWW