HP CM8060 Color MFP Kundendienst Handbuch Seite 1249

●
B1.0101: Horizontal motor (M7) stall
●
B1.02E1: Close upper paper path
●
B1.02E2: Wrong media type
●
B1.06C1: Horizontal Latch LED (LED1) not lit
●
B1.1301: Paper jam at Transparency sensor 1 (SN1)
●
B1.1302: Paper jam at Horizontal Transport 2 sensor (SN3)
●
B1.1303: Paper jam at Horizontal Transport 3 sensor (SN2)
●
B1.1304: Paper jam at Horizontal Transport 4 sensor (SN5)
●
B2.0101: IDO Input 1 motor (M8) stall
●
B2.0102: IDO Input 2 motor (M10) stall
●
B2.0103: IDO Curler motor (M15) stall
●
B2.0104: IDO Media Eject motor (M13) stall
●
B2.0105: IDO Duplex motor (M12) stall
●
B2.0106: IDO Output motor (M11) stall
●
B2.02E1: Close left-side lower panel
● B2.02E2: Close left-side middle panel
● B2.02E3: Close left-side upper panel
● B2.0301: Able to open locked left-side upper panel
● B2.03C1: IDO Diverter solenoid (SOL2)
● B2.03C2: Cannot open left-side upper panel
● B2.06C1: Left-side Middle Panel LED (LED3) not lit
● B2.06C2: Output Bin LED (LED14) not lit
● B2.06C3: IDO Curler LED (LED2) not lit
● B2.06C4: Left-side Upper Panel LED (LED5) not lit
● B2.1301: Paper jam at IDO Input Staging 2 sensor (SN10)
●
B2.1302: Paper jam at IDO Media Thickness encoder (EN14)
●
B2.1303: Paper jam at IDO Input Staging 1 sensor (SN7)
●
B2.1304: Paper jam at IDO Input Media sensor (SN8)
●
B2.1305: Paper jam at IDO Output Media sensor (SN9)
●
B2.1306: Paper jam at IDO Output 1 sensor (SN15)
●
B2.1307: Paper jam at IDO Output 2 sensor (SN12)
DEWW 1183