HP CM8060 Color MFP Kundendienst Handbuch Seite 1363

Check the wire harness between the Tray 5 Distribution PCA (A101) and the Motion PCA (A2)
1. Check the wire harness and connections between A101 and A2.
„Tray 5 wiring diagram" auf Seite 2281
2. Repair as needed.
3. If no problem is found, replace the following in order:
1) Cabling between Tray 5 and print engine.
2) A101.
1 3) Wire harness between A2 and the print engine bulkhead.
Replace the Motion PCA (A2)
1. Replace A2.
„Motion PCA (A2)" auf Seite 710
VORSICHT! Use an ESD strap.
DEWW A2.1301: Paper jam at Tray 5 Media 1 sensor (SN101) 1297