HP CM8060 Color MFP Kundendienst Handbuch Seite 1412

B2.0105: IDO Duplex motor (M12) stall
Initial Steps
1. „IDO component locator" auf Seite 2365
HINWEIS: If a servo motor is powered on, it will feel like there is a bind.
Set DVM to the appropriate range for the voltage.
VORSICHT! Be careful when working around electricity.
Moving parts can cause injury.
ACHTUNG: Do not use the frame as ground.
Turn the IDO Duplex motor (M12) by hand
1. Open the IDO.
2. Turn M12 by hand. All the rollers should turn.
„IDO component locator" auf Seite 2365
Do the duplex transport paper path rollers turn?
No Yes
Check the IDO Duplex Motor encoder (EN7) count
1. Turn the drive roller by hand.
„IDO component locator" auf Seite 2365
TIPP: Click Subsystems, click Paper Path, and then click IDO Motors.
1 Does the encoder count change?
1 No Yes
Turn the IDO Duplex motor (M12) forward
1. Turn on M12 in the forward direction.
TIPP:
1 2 Does the motor turn?
No
1 2
1 2 3
1 2 3
1346 Kapitel 8 Hardware fault trees
Click Subsystems, click Paper Path, and then click IDO Motors.
Yes
Turn the IDO Duplex motor (M12) in reverse
1. Turn on M12 in the reverse direction.
TIPP: Click Subsystems, click Paper Path, and then click IDO Motors.
Does the motor turn?
No Yes
DEWW