HP CM8060 Color MFP Kundendienst Handbuch Seite 1261

Test the voltage at the Tray 1 LED (LED12)
1. Verify that J10 is connected on the Motion PCA (A2).
2. Disconnect W36P12 from the LED.
3. Activate the LED, and then test the voltage to LED12: 2 Vdc at pins 3A to 2A on W67p2-W36J2.
1 Is the voltage correct?
No Yes
1
Replace the Tray 1 LED (LED12)000
1 2 1. Replace the LED.
Check the wire harness between the Motion PCA (A2) and the Tray 1 LED (LED12)
1. Check the wire harness between A2 and the LED. Repair as needed.
1 „Tray 1 wiring diagram" auf Seite 2259
Replace the Motion PCA (A2)
1. Replace A2.
„Motion PCA (A2)" auf Seite 710
DEWW A0.06C1: Tray 1 LED (LED12) not lit 1195