HP CM8060 Color MFP Kundendienst Handbuch Seite 1521

C7.0B52: Bonding Agent supply is missing
Initial Steps
1. Verify that the Bonding Agent cartridge is fully inserted and latched.
Reinstall the original Bonding Agent cartridge
1. Reinstall the Bonding Agent cartridge.
Is a message prompting you to replace the Bonding Agent cartridge displayed on the control panel?
No Yes
Replace the suspected failed Bonding Agent cartridge with a new Bonding Agent cartridge
1. Replace the Bonding Agent cartridge with a new Bonding Agent cartridge.
1 Is a message prompting you to replace the Bonding Agent cartridge displayed on the control panel?
1 No Yes
Check for contamination
1. Check for moisture, ink, or PEG on the Bonding Agent cartridge connector.
2. Check the wire harness between the ISS PCA (A8) and the Bonding Agent cartridge connector.
HINWEIS:
1 2
Is there moisture, ink, or PEG on the Bonding Agent cartridge connector?
No
1 2
1 2 3
Check for bent pins
1. Remove the suspected Bonding Agent cartridge and check for bent pins on the Bonding Agent cartridge connector.
1 2
Are the pins bent on the Bonding Agent cartridge connector?
No
1 2
1 2 3
1 2 „Final activities" auf Seite 24
„Final activities" auf Seite 24
1
„Final activities" auf Seite 24
DEWW
Verify that the Bonding Agent cartridge connector on A8 is properly seated.
Yes
Clean the contamination as needed
1. If problem continues, replace the Bonding Agent cartridge connector.
Yes
Try repairing the bent pins
1. Remove the Bonding Agent cartridge connector and try reforming the pins.
2. If problem continues, replace the Bonding Agent cartridge connector.
C7.0B52: Bonding Agent supply is missing 1455