B1.02E2: Wrong media type
Initial Steps
1.
„Horizontal wiring diagram" auf Seite 2283
Check the following conditions
1.
Verify that the media loaded in the paper trays matches the media selected on the control panel.
2.
Verify that hole punched paper is oriented correctly in the paper tray.
3.
Check for obstructions in the paper path.
4.
Check the condition of the paper.
5.
Clean the sensor and the surrounding area.
6.
Verify that the media guides in the trays are registered to the media.
7.
Manually activate the Transparency sensor 1 (SN1).
Is the problem resolved?
No
Yes
1
„Final activities" auf Seite 24
„B1.1301: Paper jam at Transparency sensor 1 (SN1)" auf Seite 1326
DEWW
B1.02E2: Wrong media type 1323