HP CM8060 Color MFP Kundendienst Handbuch Seite 1358

Test the voltage at the Tray 5 Top Door LED (LED102)
1. Verify that J13 is connected on the Motion PCA (A2).
2. Disconnect the wire connector from the LED.
3. Test the voltage at LED102: 5 Vdc at pins 2 to 1 on W103P111-LED102.
1 Is the voltage correct?
No Yes
1
Replace the Tray 5 Top Door LED (LED102)
1. Replace LED102.
1 2 „LEDs" auf Seite 786
Check the wire harness between the Motion PCA (A2) and theTray 5 Top Door LED (LED102)
1. Check the wire harness between A2 and the LED. Repair as needed.
1 „Tray 5 wiring diagram" auf Seite 2281
Replace the Motion PCA (A2)
1. Replace A2.
„Motion PCA (A2)" auf Seite 710
1292 Kapitel 8 Hardware fault trees DEWW