HP CM8060 Color MFP Kundendienst Handbuch Seite 1250

●
B2.1308: Paper jam at IDO Duplex Staging sensor (SN11)
●
B2.1309: Paper jam at IDO Duplex Media sensor (SN16)
●
C1.0101: Drum motor (M3) stall
● C1.01A1: Drum motor (M3) requires higher than normal power (PWM) to operate
●
C1.06C1: Drum Illumination 1 LED (LED8) not lit
●
C1.06C2: Drum Illumination 2 LED (LED9) not lit
●
C1.06C3: Noise in the drum drive area
●
C2.0201: Dryer Temperature sensor (SN36) problem
●
C2.06C1: Dryer LED (LED6) not lit
●
C2.0901: Dryer fan (FAN5) problem
●
C2.09A1: Dryer fan (FAN5) RPM too low
●
C2.0C01: Dryer heater (HTR1) problem
●
C4.0101: Web Drive motor (M5) stall
● C4.0102: Web Wipe Material Lift motor (M4) stall
●
C4.0201: Spit web not detected
●
C4.0202: Change web wipe supply
●
C4.02A1: Low Web wipe supply
●
C4.0501: Web Advance encoder (EN11) stall
●
C7.0B06: IDS system will not pressurize
●
C7.0B07: IDS system will not depressurize
●
C7.0B08: IDS leak detected
●
C7.0B10: Black ink supply is empty
● C7.0B11: Black ink supply has failed
● C7.0B12: Black ink supply is missing
●
C7.0B13: Black ink supply is non-HP
●
C7.0B20: Cyan ink supply is empty
●
C7.0B21: Cyan ink supply has failed
●
C7.0B22: Cyan ink supply is missing
●
C7.0B23: Cyan ink supply is non-HP
●
C7.0B30: Magenta ink supply is empty
●
C7.0B31: Magenta ink supply has failed
1184 Kapitel 8 Hardware fault trees DEWW