HP CM8060 Color MFP Kundendienst Handbuch Seite 1500

C7.0B08: IDS leak detected
Initial Steps
1. Check for ink leaks in the following areas:
1) The floor underneath the unit
2) IDS connections
3) Pens
4) Near or around the ISS (ink supply station) unit
5) Ink cartridges
ACHTUNG: Do not remove an air hose. You will not be able to remove an ink cartridge.
Check for a broken bag
1. Open the Ink Status page and determine is one of the ink cartridges has a broken bag.
Does one on the ink cartridges have a broken bag?
No Yes
Determine if the ink cartridges are pressurized
1. Determine if the ink cartridges are pressurized.
1
Are the ink cartridges pressurized?
No Yes
1
Follow the procedure to remove a pressurized ink cartridge
1 2 1. Follow the procedure to remove a pressurized ink cartridge.
Remove the ink cartridges
1. Remove the ink cartridges.
2. Open the Ink Status page and determine if any of the ink cartridges are indicated to have a broken bag.
1 Are any of the ink cartridges indicated to have a broken bag?
1 No Yes
Disconnect the acumen cable
1. Disconnect the acumen cable to the ink cartridge that is indicated to have the broken bag.
2. Open the Ink Status page and determine if the ink cartridge is indicated to have a broken bag.
1 2 Is the ink cartridge indicated to have a broken bag?
1 2 No
1 2 3
1 2 3
1434 Kapitel 8 Hardware fault trees
Yes
Disconnect the acumen cables from the ISS PCA (A8)
1. Disconnect all of the acumen cables from A8.
2. Open the Ink Status page and determine if the ink cartridge is indicated to have a broken bag.
Is the ink cartridge indicated to have a broken bag?
No Yes
DEWW