1
2
3
Check the wire harness
1.
Check the wire harness between the Motion PCA (A2) and the IDO Media Eject motor (M13).
2.
Repair as needed.
1
2
„IDO paper path 1 wiring diagram" auf Seite 2285
Replace the Motion PCA (A2)
1.
Replace A2.
1
„Motion PCA (A2)" auf Seite 710
Replace the Motion PCA (A2)
1.
Replace A2.
„Motion PCA (A2)" auf Seite 710
DEWW
Check the wire harness
1.
Check the wire harness between the Motion PCA (A2) and the encoder.
„IDO paper path 2 wiring diagram" auf Seite 2286
B2.0104: IDO Media Eject motor (M13) stall 1345