HP CM8060 Color MFP Kundendienst Handbuch Seite 1352

Check the wire harness between the Motion PCA (A2) and the Tray 5 Distribution PCA (A101)
1. Check the wire harness and connections between A2 and A101.
2. If no problem is found, replace the following in order:
1) Cabling between Tray 5 and print engine.
2) A101.
3) Wire harness between A2 and the print engine bulkhead.
„Tray 5 wiring diagram" auf Seite 2281
1 VORSICHT!
Replace the Motion PCA (A2)
1. Replace A2.
„Motion PCA (A2)" auf Seite 710
VORSICHT! Use an ESD strap.
1286 Kapitel 8 Hardware fault trees
Use an ESD strap.
DEWW