Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9
Maintenance and troubleshooting
9.1
Safety information relating to maintenance and troubleshooting
Improperly performed maintenance and troubleshooting
9.2
Maintenance plan
Maintenance intervals
The following sections describe the maintenance work necessary for optimum, fault-free
operation of the control unit.
If increased wear is noticeable during regular inspections, shorten the required maintenance
intervals according to the actual signs of wear.
If you have any questions about the maintenance work and intervals, contact
RK Rose+Krieger GmbH
Maintain components provided by the operator regularly according to the specifications
provided by the respective manufacturers.
280
WARNING!
Risk of injury due to improperly performed maintenance
and troubleshooting work!
Improper maintenance and troubleshooting work can lead to
injury and property damage.
– Before starting work, pull the mains plug and ensure that
there is sufficient space for assembly.
– Ensure that the assembly site is kept clean and tidy at all
times! Components and tools lying around or on top of one
another are sources of accidents.
– If components have been removed, ensure that they are
assembled correctly, reinstall all the fixing elements and
adhere to the screw tightening torques.
– Observe the following before re-commissioning:
– Ensure that all maintenance and troubleshooting
work has been performed and completed according
to the specifications and information in this manual.
– Ensure that nobody is still in the danger zone.
⮱
„Customer service" on page 160.
Control RK MultiControl II duo/RK MultiControl II quadro
Werbung
