RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 264

264
Selecting the 'Service view' menu
The function is used to check the system for possible
overloads or distribution of the loads.
◼ The main menu for the hand switch is displayed
Prerequisite:
⇨ The 'Service view' (Figure 124) menu.
Select the menu via 'Control' → 'Service' → 'Service view' (Figure 123).
1.
In the 'Service view' menu the current consumption of
the connected drives is displayed as a bar graph and as
a number in amperes.
In the lower part of the display the stroke is displayed in
the currently set unit.
Figure 123 - Selecting a menu
Figure 124 - 'Service view' menu
Control RK MultiControl II duo/RK MultiControl II quadro
⮱
8.3 on page 215.