Overview; Operating Interface - RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung

8.1

Overview

Operating interface

Figure 31 - Operating inter-
Symbols on the display screen
Symbol
210
face
Logo RK Rose+Krieger GmbH
Synchronisation bus (sync bus) activated
No. Button
Fig. Figure
Display screen (symbols
31/1
Fig. Figure
31/2
Fig. Figure
31/3
Fig. Figure
31/4
Fig. Figure
31/5
Fig. Figure
31/6
Fig. Figure
31/7
* The buttons are only marked with the numbers '1'
and '2' in these instructions for reasons of clarity. In reality the
function buttons are not marked.
Control RK MultiControl II duo/RK MultiControl II quadro
Function
⮱
table on page 210)
The buttons [1]* and [2]* open or
execute the fields/functions directly
above on the display screen.
Depending on the selected menu the
symbols on the display screen and thus
the function of the function buttons
change.
The drives connected to the control
unit are moved by pressing the [UP] and
[DOWN] buttons.
Moreover, the individual menu items can
be selected within the control unit and
parameter values can be set.
Press the [M] button to call up the main
⮱
menu page 215.
Press the [F] button to call up the short
⮱
men page 216.
Function