RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 155

4.4 Drives
4.5 Connections
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
5 Transport and storage
6 Assembly
6.1 Safety information for assembly
6.2 Conditions at the installation site
6.3 Installing the RK MultiControl II
6.4 Connecting the accessories
6.4.1
6.4.2
6.4.3
6.4.4
6.4.5
6.4.6
Control RK MultiControl II duo/RK MultiControl II quadro
4.3.3.5 Drives extension cable
4.3.3.6 Y cable for power-intensive drives
4.3.3.7 RKX interface
4.3.3.8 Hand switch cable with open end
4.3.3.9 DATA interface cable with open end
4.3.3.10 Adapter cable for hand switch with DIN connector
Connection configuration - RK MultiControl II duo
Connection configuration - RK MultiControl II quadro
Hand switch interface - RK MultiControl II duo/quadro
DATA interface - RK MultiControl II duo/quadro
Drive slot - RK MultiControl II duo/quadro
Connecting the drives
6.4.1.1 Connecting the drives to the RK MultiControl II duo
6.4.1.2 Connecting the drives to the RK MultiControl II quadro
Connecting the hand switch
Connecting the safety edge provided by the operator
Connecting the operator's stop input
Setting up the synchronisation bus
Connecting the IO interface module
6.4.6.1 Connection configuration - IO interface module
178
178
179
179
180
180
180
182
182
182
182
183
184
185
186
186
186
187
188
188
188
189
191
192
196
198
200
200
155