5
Transport and storage
Transport inspection
Immediately check the delivery upon receipt to ensure that it is complete and free from
transport damage. Report the extent of the damage to the person responsible and to
RK Rose+Krieger GmbH immediately.
Storage
◼ Only place it on a load-bearing substrate.
Store control units in the following conditions:
◼ Avoid any contact with solvent-based paints.
◼ Do not store in an atmosphere with solvent content.
◼ Storage temperature: -25 - 80 °C
◼ Relative humidity: Avoid 30% - 75% condensation.
◼ Temperatures below the dew point are not permitted.
◼ Ambient air pressure: 700 hPa - 1600 hPa
Control RK MultiControl II duo/RK MultiControl II quadro
Figure 16 - Transport inspection
NOTICE!
Damaged control units must not be commissioned!
Deviating environmental conditions must be approved by
RK Rose+Krieger GmbH.
185