RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 180

4.4 Drives
Incompatible drives
Compatible drives
The following RK Rose+Krieger GmbH drives can be connected to the control:
Display/
code
10
11
12
13
180
4.3.3.9 DATA interface cable with open end
The 4 m long data interface cable is used for connecting a safety edge and/or an
external stop input switch.
◼
Further information:
⮱
„4.5.4 DATA interface - RK MultiControl II duo/quadro" on page 183
4.3.3.10 Adapter cable for hand switch with DIN connector
The 0.2 m long adapter cable is used for connecting hand or foot switches with
DIN connectors.
NOTICE!
Material damage caused by using an incompatible drive!
– Only use the RK Rose+Krieger GmbH drives listed in the table.
Drive
Multilift I/ Multilift synchro
Multilift II
Multilift II Telescope
Multilift II Impact
Nominal Resolution
load [N]
1000
3000
1000
3000
1000
3000
1000
3000
Control RK MultiControl II duo/RK MultiControl II quadro
[inc/mm]
[inc/s]
2 26
4 26
26 360
52 360
25.333 360
52 360
26 360
52 360
Speed
[mm/s]
13.00
6.5
13.85
6.92
14.21
6.92
13.85
6.92