Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3.2
Electric current
166
Electrical hazards
DANGER!
Danger of death due to electric current!
There is an imminent danger of death in the event of contact
with live parts. Damage to the insulation or individual
components can be life-threatening.
– Only have qualified electricians carry out work on the
electrical system.
– Make sure that the mains plug is freely accessible after
assembly of the lifting column in the operator's construction.
– In case of damage to the mains supply cable, motor cable
or other control cables (PLC, PC etc.) pull the mains plug,
remove the control unit from service and have repairs made.
– Before starting work on live parts of electrical systems and
equipment, isolate them from the voltage (pull the mains
plug) and make sure that they remain de-energised for the
duration of the work.
– Never bridge or disable fuses. When replacing fuses, observe
the correct current specification.
– Keep moisture away from live parts. Otherwise, this can lead
to a short-circuit.
Control RK MultiControl II duo/RK MultiControl II quadro
Werbung
