RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 229

8.4.6
Control RK MultiControl II duo/RK MultiControl II quadro
'Update' menu
When the RK MultiControl II is delivered, the software of the
hand switch is not stored in the control.
The software can be transferred to the control unit for the first
time via an RKX interface with corresponding user interface
(RKX PC program) or updated later.
Figure 63 - 'Update' menu
8.4.6.1 'HS Update' menu
The hand switch software is updated with this function.
Additional functions may be available depending on the
software version of the control.
◼ The main menu for the hand switch is displayed
Prerequisites:
◼ Current hand switch software is stored in the control.
Selecting the 'HS Update' menu
Select the menu via 'Hand switch' → 'Update' → 'HS Update'
1.
(Figure 64).
⮱
8.3 on page 215.
229