RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 208

⇨ The LED display lights up green. The initialization run is complete. The control is
6.
Press and hold the
ready for operation.
208
button until all drives have moved into the upper final position.
If the upper final position cannot be reached or an upward stroke limita-
tion is to be set, the initialization run can be ended in any position.
To do so, press and hold the
position for the upper final position of the drives has been set.
Control RK MultiControl II duo/RK MultiControl II quadro
button for approximately 5 s. The new