Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.6
Staff requirements
Insufficient qualification
Authorised staff
The different tasks described in this manual require the persons to whom the tasks
were assigned to have different qualifications.
Only persons who can be expected to reliably complete the tasks are approved for all
work. Persons whose reactions are impaired due to drugs, alcohol or medication, for
example, are not approved.
Staff qualifications
In this manual, the following staff qualifications are listed for the different tasks.
Assembly staff
Assembly staff are the persons designated by the operator to carry out installation and
assembly, maintenance and troubleshooting for the control unit. The operator must
ensure that the staff deployed are qualified to carry out the assembly and installation
work.
Based on their professional training, knowledge and experience, as well as their
knowledge of the relevant regulations, the assembly staff must be capable of carrying
out work assigned to them and of independently identifying and avoiding potential
hazards.
Assembly staff are specifically trained for the area of responsibility in which they work
and are familiar with the relevant standards and regulations.
170
WARNING!
Danger in the event of insufficiently qualified persons!
Insufficiently qualified persons are unable to assess the risks
associated with handling the control unit and thus put themselves
and others at risk of severe or fatal injury.
– Only have suitably qualified persons carry out all work.
– Insufficiently qualified persons must be kept away from the
work area.
Control RK MultiControl II duo/RK MultiControl II quadro
Werbung
