Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.5.3
Control RK MultiControl II duo/RK MultiControl II quadro
Setting 'the basic height'
⇨ A new basic height has been set.
2.
Set the new basic height (Figure 95).
'Stroke limit' menu
8.5.3.1
'Set upper stroke limit' menu
The upper stroke limit can be set either during the
initialization run or later using the 'Set upper stroke limit'
menu.
◼ The drives are in the desired position which is used as the final position.
Prerequisites:
◼ The main menu for the hand switch is displayed
Selecting a menu
Select the menu via 'Control' → 'Stroke limit' → 'Set upper stroke limit'
1.
(Figure 96).
Figure 94 - Selecting a menu
Figure 95 - Entering a value
⮱
8.3 on page 215.
247
Werbung
