RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 213

Setting parameters
You can press the
enter values.
Each time the respective button is pressed, the number is increased or reduced.
You can press the
the left within the parameter.
Press the
the unit.
Example:
Select the 'Change basic height' menu
Figure 32 - Main menu
Figure 33 - 'Control' menu
Control RK MultiControl II duo/RK MultiControl II quadro
button and the
button ( ) or the
For some parameters the unit is set in the last position.
button ( ) to confirm the setting after changing the final digit of the parameter/
button to set the parameter (z. B. 'Basic height' ) or
button ( ) to jump one position to the right or to
◼ User
Personnel:
◼ The hand switch has been connected.
Prerequisite:
1.
⇨ The main menu (Figure 32) is displayed.
Press the button.
◼ Press and hold the
2. Select the menu item 'Control' :
◼ Confirm the selection with the
item 'Control' is displayed.
⇨ The menu item 'Control' (Figure 33) has been
selected.
suttons until the menu
button ( ).
213