Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control RK MultiControl II duo/RK MultiControl II quadro
8.5.1.2
'Deactivate drive group management' menu
Premium version
This function is only available with the premium version.
The Multilift I and Multilift Synchro cannot be used with the
premium version of the RK MultiControl II control.
Drive group management
The function allows you to adjust two defined drive groups
on an RK MultiControl II quadro individually, synchronously
or parallel to each other.
The function can be selected during initialization.
The drives of the first group are connected to drive slots M1 and M2, and the drives
of the second group are connected to drive slots M3 and M4
To enable the function of the respective group, drive slots M1 and M3 must be
occupied at all times.
The following configurations are possible:
Total
M1
M1 + M2
M1 + M3
M1 + M2 + M3
M1 + M3 + M4
M1 + M2 + M3 + M4
8.5.1.2.1 Activating drive group management when commis-
sioning for the first time
◼ The drives are connected to the RK MultiControl II quadro
Prerequisite:
Drive group 1
M1
M1+ M2
M1
M1+ M2
M1
M1+ M2
⮱
4.5.2 on page 182.
Drive group 2
-
-
M3
M3
M3 + M4
M3 + M4
⮱
page 189.
235
Werbung
