RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 249

Control RK MultiControl II duo/RK MultiControl II quadro
8.5.3.2 Set lower stroke limit menu
The lower stroke limit can be set either during the
initialization run or later using the 'Set lower stroke limit
menu' menu.
◼ The drives are in the desired position which is used as the final position.
Prerequisites:
◼ The main menu for the hand switch is displayed
Selecting a menu
Select the menu via 'Control' → 'Stroke limit' → 'Set lower stroke limit'
1.
(Figure 99).
Activating stroke limitation
⇨ The current position of the drives is applied as the lower final position.
2.
Select 'Activate lower stroke limit' (Figure 100).
Figure 99 - Selecting a menu
Figure 100 - Activating stroke limitation
⮱
8.3 on page 215.
249