RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 269

Control RK MultiControl II duo/RK MultiControl II quadro
Select the 'Change parameter' menu
The function allows you to change the parameters directly in
order to adjust the settings of a control unit.
◼ The main menu for the hand switch is displayed
Prerequisite:
Selecting a menu
Select the menu via 'Control' → 'Parameter' → 'Change parameter'
1.
⇨ The 'Change parameter' menu (Figure 131) is displayed.
(Figure 130).
Changing parameters
2.
Select the parameter as per the table of parameters
⇨ The parameter has been set.
3. Set the parameter (Figure 132).
Figure 130 - Selecting a menu
Figure 131 - Selecting parameters
⮱
8.3 on page 215.
⮱
page 270.
269