Werbung
Verfügbare Sprachen
Verfügbare Sprachen
246
Setting the stroke height and unit
⇨ A new stroke height and unit have been set for the stroke indicator.
2.
Set the new stroke height (Figure 93) and unit (cm, mm, inches or %).
8.5.2.2
'Change basic height' menu
A basic height can be used with the drives in a completely
retracted position, for example, to indicate the work surface
above the floor.
The basic height can only be changed if the unit is set
to cm, mm or inches in the 'Stroke unit/ indicator' menu
⮱
(
◼ The main menu for the hand switch is displayed
Prerequisite:
Selecting a menu
Select the menu via 'Control' → 'Stroke settings' → 'Change basic
1.
height' (Figure 94).
Figure 92 - Selecting a menu
Figure 93 - Entering a value
8.5.2.1 on page 245).
Control RK MultiControl II duo/RK MultiControl II quadro
⮱
page 215.
Werbung
