Werbung
Verfügbare Sprachen
Verfügbare Sprachen
268
Transferring parameters
2.
Press the
button to transfer the settings from the control to the hand
switch memory.
Reconnecting the hand switch
3.
Disconnect the cable of the hand switch from the control
4.
Connect the cable of the hand switch to the control to which you wish
to transfer the settings.
Transferring parameters
⇨ The 'Copy set of parameter' menu (Figure 129) is displayed.
Select the menu via 'Control' → 'Parameter' → 'Transfer parameters'.
5.
6.
button to transfer the settings from the hand switch memory
Press the
⇨ The control settings are transferred.
to the control.
8.5.8.2
'Change parameter' menu
Advanced password
The menu is only displayed if the advanced password has
been set
The advanced password is available on request from
RK Rose+Krieger GmbH.
Figure 129 - 'Transfer parameters' menu
⮱
page 232.
Control RK MultiControl II duo/RK MultiControl II quadro
⮱
page 191.
Werbung
