Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.1
Overview
Operating interface
Figure 30 - Hand switch operating interface
The drives connected to the control unit are moved by pressing the buttons
7.2
Carrying out initialization
Non-synchronous movement
206
NOTICE!
Material damage as a result of non-synchronous
movement of mechanically connected drives!
An initialization run of the drives must be performed
before commissioning or installing them. There is a risk
of breakage during the initialization run if drives are
connected mechanically and moved non-synchronously.
– Only carry out the initialization run without a load and with
extreme caution.
– Only move the drives by sight.
Control RK MultiControl II duo/RK MultiControl II quadro
1 [Down] button
2 [Up] button
.
Werbung
