Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control RK MultiControl II duo/RK MultiControl II quadro
⇨ The drive position has been saved.
3.
Press the
button ( ).
8.5.6.2
Driving to memory position
◼ A memory position has been stored
Prerequisites:
◼ The main menu for the hand switch is displayed
Selecting a menu
Select the menu via 'Control' → ' Memory positions for IO Interface'
1.
→ 'Drive to memory positions' (Figure 118).
Driving to memory positions
2.
Select the memory position to be assumed (in this case: '1' , Figure 119).
3.
⇨ The drive stops automatically when the saved memory position is
Press and hold the
reached.
⮱
Figure 118 - Selecting a menu
Figure 119 - Selecting memory positions
button (
).
page 260.
⮱
8.3 on page 215.
261
Werbung
