Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Assembly
6.1
Safety information for assembly
Improper assembly
6.2
Conditions at the installation site
◼ Sufficient lighting is available.
The following conditions must be met at the installation site for the control unit:
◼ The installation site is clean and dry, and free from dust and objects.
◼ The atmosphere must be free from solvents.
◼ All of the connections required on site are available.
◼ Room temperature: +5 - +40 °C
◼ Relative humidity: 30 - 75%
◼ Air pressure: 700 hPa - 1600 hPa
◼ Temperatures below the dew point are not permitted.
186
WARNUNG!
Risk of injury due to improper assembly!
Improper installation and assembly can lead to severe injuries and
substantial material damage.
– Before starting work, pull the mains plug and ensure that
there is sufficient space for assembly.
– Handle exposed components with sharp edges carefully.
– Ensure that the assembly site is kept clean and tidy at all
times! Components and tools lying around or on top of one
another are sources of accidents.
– Assemble components properly. Adhere to the required screw
tightening torques.
Control RK MultiControl II duo/RK MultiControl II quadro
Werbung
