Werbung
Verfügbare Sprachen
Verfügbare Sprachen
258
Activating the bus connection
2.
Press the
(
drives is correct.
⇨ The bus connection is activated.
The number of connected control units is determined
and displayed by the master control unit (Figure 114/
).
In the process, an address between 1 and 7 is assigned
to each connected slave control unit. This number
is displayed by the slave control units on the display
screen as soon as a hand switch is connected.
In addition the total number of all connected drives is
determined and displayed (Figure 114/ ).
Figure 113 - Selecting a menu
) button if the number of connected control units and
If the number is not correct, press the
Figure 114 - Activating the bus connection
Control RK MultiControl II duo/RK MultiControl II quadro
(
) button.
Werbung
