Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control RK MultiControl II duo/RK MultiControl II quadro
Carrying out an initialization run
3.
Carry out an initialization run.
8.5.5.2
'Deactivate BUS connection' menu
This function deactivates the bus system so that a control
unit can be operated individually in the synchronisation bus.
This function cannot be activated when drive group
management is activated.
◼ The synchronisation bus is connected
Prerequisites:
◼ The bus system has been activated
◼ The main menu for the hand switch is displayed
Selecting a menu
Call up the menu via 'Control' → 'Sync-BUS settings' → 'Deactivate BUS
1.
⇨ The bus system is deactivated.
connection' (Figure 115).
⮱
page 233
Once the synchronisation bus has been connected,
activated and initialized, the hand switch with 2 buttons
⮱
7.1 on page 206 can also be used to operate the
bus connection.
To do so, replace the hand switches
⮱
Figure 115 - Selecting a menu
⮱
page 191.
⮱
page 198.
page 258.
⮱
8.3 on page 215.
259
Werbung
