RK Rose+Krieger Gesamt RK MultiControl II duo Montageanleitung Seite 238

238
Selecting drive group 2
7.
Select the second drive group (
Carrying out drive group 2 initialization run
8.
Carry out the initialization run for the second drive group (
⮱
page 233.
8.5.1.2.2 Activating drive group management after commis-
sioning
◼ The drives are connected to the RK MultiControl II quadro
Prerequisite:
Control RK MultiControl II duo/RK MultiControl II quadro
Figure 76 - Selecting drive group 2
Figure 77 - Carrying out initialization run
During initialization runs each drive group is
moved at the possible nominal speed of the
connected drives and stops when the limit switch
is reached separately.
On completion of the initialization runs the
display screen switches to „drive management"
mode.
).
⮱
)
page 189.