Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Figure 34 - Setting the pass-
Figure 35 - 'Stroke settings'
Figure 36 - 'Change basic
Setting the basic height
Figure 37 - Entering a value
214
word
menu
height' menu
3.
The 'Control' menu is protected by
password.
Set the basic password '13121' (Figure 34).
◼ Press and hold the
4.
Select the menu item 'Stroke settings':
◼ Confirm the selection with the
item 'Stroke settings' is displayed.
⇨ The menu item 'Stroke settings' (Figure 35) has
been selected.
◼ Press and hold the
5.
Select the menu item 'Change basic height' :
◼ Confirm the selection with the
item 'Change basic height' is displayed.
⇨ The menu item 'Change basic height' (Figure 36)
has been selected.
6.
Press the
buttons until the basic height (Figure
37) has been set.
If necessary, press the
jump a digit to the right in the parameter.
7.
After changing the final digit or unit of the parameter,
⇨ The basic height has been set.
press the
button (
Control RK MultiControl II duo/RK MultiControl II quadro
buttons until the menu
button (
buttons until the menu
button (
button ( ) to
).
).
).
Werbung
