Access the following items from the troubleshooting screen:
●
Subsystem diagnostic pages
●
Diagrams
●
Fault trees (CDFT-L only)
Troubleshooting Options
●
Use subsystem diagnostic pages
●
View diagrams
●
Use fault trees (CDFT-L only)
Use subsystem diagnostic pages
Each subsystem has at least one diagnostic screen. To access the diagnostic screen for a subsystem:
▲
Click the button that displays the subsystem name from the troubleshooting screen for the event
code.
View diagrams
From the troubleshooting screen for the event code, click one of the following buttons:
●
Component locator
●
Wiring diagram
●
Parts diagram (CDFT-L)
In CDFT-E, the diagrams are displayed on the control panel. In CDFT-L, an electronic version of the
service manual opens and displays diagrams.
Use fault trees (CDFT-L only)
Use the step-by-step fault tree wizard in CDFT-L to troubleshoot an event code. To use the wizard:
▲
Click Fault tree from the troubleshooting screen for the event code.
HINWEIS:
corresponding fault tree. If a fault tree is not available for an event code, the Fault tree button is not
displayed.
When a fault tree is used for troubleshooting a subsystem, the diagnostic screen for the subsystem does
not need to be accessed. The fault tree displays all service application components needed for
troubleshooting.
View diagnostic trends
The Event Log is used to perform the following tasks:
●
View all diagnostic trends
●
View diagnostic category trends
●
View diagnostic trend graphs
50
Kapitel 3 Copier Diagnostic Field Tool (CDFT)
While diagnostic information is available for all event codes, not all event codes have a
DEWW