Control Position Adjustments; Brake Reach - Giant momentum Anleitung

Your dealer can also change the angle of the handlebar or bar end extensions.
WARNING: An insufficiently tightened stem clamp bolt, handlebar clamp bolt or bar end extension
clamping bolt may compromise steering action, which could cause you to lose control and fall. Place
the front wheel of the bicycle between your legs and attempt to twist the handlebar/stem assembly. If
you can twist the stem in relation to the front wheel, turn the handlebars in relation to the stem, or turn
the bar end extensions in relation to the handlebar, the bolts are insufficiently tightened.
D. Control position adjustments
The angle of the brake and shift control levers and their position on the handlebars can be changed. Ask
your dealer to make the adjustments for you. If you choose to make your own control lever angle adjustment, be
sure to re-tighten the clamp fasteners to the recommended torque (Appendix D or the manufacturer's
instructions).
E. Brake reach
Many bikes have brake levers which can be adjusted for reach. If you have small hands or find it difficult to
squeeze the brake levers, your dealer can either adjust the reach or fit shorter reach brake levers.
WARNING: The shorter the brake lever reach, the more critical it is to have correctly adjusted brakes,
so that full braking power can be applied within available brake lever travel. Brake lever travel
insufficient to apply full braking power can result in loss of control, which may result in serious injury or
death.
13