Explanation of the symbols on the device
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompanying
explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace proper ac-
cident prevention measures.
Before commissioning, read and
observe the operating manual and
safety instructions!
Wear safety goggles!
Wear hearing protection!
Use work gloves.
Use safety shoes.
Do not expose the device to rain.
Lifting point, on which the machine
can be securely fastened, e.g. to
load onto a transport vehicle.
www.scheppach.com
Lifting point is used to secure the
machine during transport.
Removing or modifying protective
or safety equipment is prohibited.
Do not touch rotating parts. Getting
caught in the spinning belt will
cause a hand injury.
Always put on the belt guard.
Naked flames or smoking near the
device is strictly prohibited!
Hot surface! Touching can cause
burns.
Only carry out servicing, mainte-
nance and cleaning work when the
engine has cooled down.
Warning - Hot parts! Make sure that
other persons maintain a sufficient
safety distance. Keep uninvolved
persons away from the device.
Sparks are produced when the
engine is started. These can ignite
nearby flammable gases.
GB | 27