Applied Standards - Siemens SIMOVERT Master Drives 6SE70 Betriebsanleitung

Technical Data
14.3

Applied standards

DIN VDE 0100
Part 540 A11.91
DIN VDE 0106
Part 1 A05.82
Part 100 A03.83
DIN VDE 0110 Part 1 and 2
A01.89
DIN VDE 0113
Part 1 A06.93
DIN VDE 0160 E04.91
DIN VDE 0298
Part 2 A11.79
Part 4 A02.80
DIN VDE 0470 Part 1 A12.92
DIN VDE 0558 Part1 A07.87
DIN VDE 0843
Part 2 A09.87 Z
DIN VDE 0875
Part 11 A12.88 Z (EN 55014: 1987) Ersetzt durch DIN VDE 0875, Teil 14 und DIN VDE 0075
Part 1 A07.92
DIN 41494 Part 5 A9.80
DIN 41651 Part 1 A9.89
DIN IEC 68 Part 2
DIN IEC 721
Part 3 A08.87
IEC 801
Part 4
EN 60146-1-1: 1993
Part 1-1
14-6
ENGLISH
Erection of power installations with rated voltages up to 1000 V,
Selection and erection of electrical equipment, earthing, PE conductor,
equipotential bonding conductor
Protection against electric shock:
Classification of electrical and electronic equipment (IEC 536)
Arrangement of actuation elements in the proximity of shock-hazard parts
Isolation coordination for electrical equipment in low-voltage installations
Safety of machines: electrical equipment of machines,
General requirements (EN 60204-1:1992)
Equipping power installations with electronic equipment
Use of cables and insulated cables for power installations:
Recommended values for the current carrying capacity of cables with rated
voltages U / U to 18/30 kV
0
Recommended values for the current carrying capacity of cables
Types of protection, shock, foreign body and water protection for electrical
equipment (EN 60529: 1991)
Semiconductor converters: general regulations and special regulations for
line-commutated converters
Electromagnetic compatibility of instrumentation and control equipment in
industrial process engineering:
Interference resistance to static electricity discharges; requirements and
measurement methods (IEC801-2) Ersetzt durch DIN EN 60801, Teil 2
(09.87)
RFI suppression of electrical equipment and installations:
(EN 55011: 1991)
Equipment practice for electronic facilities; subracks and modules
Connectors for printed circuits for connecting ribbon cables with round
conductors; indirect insertion, grid dimension 2.54 mm
Elektrotechnik; Grundlegende Umweltprüfverfahren; Prüfungen
Electrical engineering; classification of environmental conditions:
classes of influencing quantities
Electromagnetic compatibility for industrial - process measurement and
control equipment
Electrical fast transient / burst requirements
Semiconductor converters;
General requirements and line-commutated converters:
Definition of basic requirements (IEC146-1-1991)
Siemens AG 6SE7087-6AK85-0AA0
Common Rectifier Operating Instructions
06.01