Environmental Compatibility - Siemens SIMOVERT Master Drives 6SE70 Betriebsanleitung

06.01
13

Environmental Compatibility

Environmental aspects during development
The number of parts has been reduced substantially by the use of highly integrated components and by a
modular structure of the complete converter series. This reduces energy consumption during production.
Particular attention was paid to reducing volume, mass and type diversity of the metal and plastic parts.
Plastic parts used:
Flame arresters containing halogen and insulating materials containing silicone have been replaced by
pollutant-free materials in all components.
Environmental compatibility was an important criterion in the selection of externally source items.
Environmental aspects during production
Externally sourced items are mainly transported in returnable packaging. The packaging material itself is
recyclable, consisting mainly of cardboard and untreated
With the exception of galvanized housings and tinned rails, surface coatings have not been applied.
SMD components are used on the printed-circuit boards.
Production is emission-free.
Environmental aspects of disposal
The unit can be dismantled into recyclable mechanical components by means of easily removable screw and
snap joints.
The PC boards can be disposed of thermally. The number of components containing hazardous substances is
only slight.
The recyclable plastic parts are designated in accordance with DIN 54840 and marked with the recycling
symbol.
Siemens AG 6SE7087-6AK85-0AA0
Common Rectifier Operating Instructions
ABS: PMU support
PP: Insulating plate
Bus retrofit
PC: Protection against accidental contact
PA6: Insulating films
Terminal housing
wood.
ENGLISH
Environmental Compatibility
13-1