Siemens SIMOVERT Master Drives 6SE70 Betriebsanleitung Seite 228

General
These Operating Instructions are available in the following languages:
Language
Order No.:
Converter software version:
At the time these operating instructions was printed, the infeed and regenerative feedback units were supplied
from the factory with software version
These operating instructions basically also apply to other software versions.
Older software versions:
Newer software versions: It is possible that additional parameters might exist on the common rectifier units (i.e.
You can order the latest software version (EPROM) under MLFB No.: 6SW1701-0DA14.
The reproduction, transmission or use of this document or contents is
not permitted without express written authority. Offenders will be liable
for damages. All rights, including rights created by patent grant or
registration of a utility model or design, are reserved.
We have checked that the contents of this publication agree with the
hardware and software described herein. Nonetheless, differences
might exist and therefore we cannot guarantee that they are completely
identical. The information given in this publication is reviewed at regular
intervals and any corrections that might be necessary are made in the
subsequent printings. Suggestions for improvement are welcome at all
times.
© Siemens AG 1994 All rights reserved
French
6SE7087-7AK85-0AA0
4.7
.
It is possible that some parameters might not exist (i.e. that the function they apply to
does not exist) or that some parameters might have a restricted setting range.
However, this is generally marked in the parameter list where it applies.
that there are also additional functions that are not described in these operating
instructions) or that some parameters might have an extended setting range. Leave
such parameters in their factory setting and on no account set any values that are
not described in these operating instructions!
Spanish
6SE7087-8AK85-0AA0
SIMOVERT ® is a registered trademark of Siemens
Italian
6SE7087-2AK85-0AA0
09.02