Siemens SIMOVERT Master Drives 6SE70 Betriebsanleitung Seite 277

09.02
"Indexed" parameters:
♦
Several parameter values are assigned to one parameter number, which can be accessed via
the separate indices (in brief: i001, i002, etc.).
The meaning of the indices of the respective parameter (parameter number) is explained in the
parameter list in Chapter 5.
Example:
"Data sets":
♦
"Indexed" parameters can be sub-divided according to data sets.
A data set comprises a group of several parameter values with the same index. Depending on
the status of certain control word bits, a specific data record is accessed
(see the function diagram for "selecting the data sets " in Section 4.4).
There are two types of data set:
Siemens AG 6SE7087-6AK85-0AA0
Common Rectifier Operating Instructions
Index 1
i001 = 0
P683
Index 2
i002 = 2
♦ Data sets for basic/reserve setting (B/R) can be selected via control word 2/bit 30
Associated source selection parameter: P590
Affected parameters: P486, P554 to P557, P561, P565 to P569, P571 to P575,
P578, P579, P583 and P586 to P589
e.g. for changing over between manual and automatic operation
♦ 4 changeover reserve data sets (RDS) 1, 2, 3 or 4, selectable via the bit combination
in control word 2/bits 18 and 19.
Associated source selection parameters: P578, P579
Affected parameters: P140 to P144, P160, P161, P310 to P320, P329, P408,
P517, P518, P773 to P777
Used, e.g. for alternating operation of different inverter types on one common
rectifier
Bus address for serial interface SST1 (CUR)
Bus address for serial interface on the SCB module
ENGLISH
Start-Up
4-3