Werbung
119
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and the
®
The AUTOCON
ll 200 model 20 5322 20 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or user of the unit can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the unit as recommended below, according to the maximum output power of the communications
equipment.
150 kHz to < 80 MHz
Rated maximum
output power of
transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and re ection from structures, objects
and people.
Appendix
Electromagnetic Compatibility
(EMC) Information
Table 206
AUTOCON
®
ll 200 model 20 5322 20
Separation distance d [m]
according to frequency of transmitter
80 MHz to < 800 MHz
3
5 .
3
5 .
3
3
0.12
0.12
0.38
0.38
1.2
1.2
3.8
3.8
12
12
(
)
800 MHz to 2.5 GHz
7
3
0.23
0.73
2.3
7.3
23
Werbung
