Herunterladen Diese Seite drucken

Storz AUTOCON II 200 Gebrauchsanweisung Seite 12

Werbung

4
Allgemeines
Gewebetrennung
Bei der Gewebetrennung – Schneiden – wird die
Zell üssigkeit des Gewebes zum Verdampfen
gebracht. Durch den entstehenden Dampfdruck
zerreißen die Gewebezellen und der austretende
Dampfdruck bewirkt eine Isolation der Elektrode. Ist
die Spannung hoch genug, so wird der Strom uss
durch einsetzende Lichtbogenbildung zwischen
der Elektrode und dem Gewebe aufrechterhalten.
Die thermische Wirkung des Stromes verursacht
zum einen die beschriebene Gewebetrennung, zum
anderen – je nach Größe des Lichtbogens – eine
Ober ächenverschor fung.
Die Lichtbogenbildung setzt bei Spannungswer ten
um 200 V
ein. Verwendet man Spannungen ober-
halb 500 V , so ist eine starke Verschorfung durch
die im Lichtbogen freigesetzte Energie die Folge.
Automatische Regelkreise ermöglichen für das
Schneiden eine optimale, reproduzierbare Qualität
des Schnittes, welche weitestgehend unabhängig
ist von Schnitttiefe, Schnittge schwin digkeit, Gewe-
bewiderstand u. ä. Die Leistungsabgabe wird dabei
automatisch auf die zum Schneiden notwendige
Leistung geregelt.
General information
Separation of tissue
When separating tissue (cutting), the cell sap of the
tissue is vaporized. Due to the resulting vapor pres-
sure, the tissue cells tear and the escaping vapor
pressure causes the electrode to be insulated. If the
voltage is high enough, the current ow is main-
tained by the commencement of arcing between
the electrode and tissue. The thermal effect of the
current causes the separation of tissue and the
formation of surface slough, depending on the size
of the arc.
Arcing commences at voltages of around 200 V .
If voltages above 500 V
are used, the result is
substantial formation of slough due to the energy
released in the arc.
For cutting, automatic control loops allow an
optimal, reproducible cutting quality to be achieved,
which is to the greatest possible extent indepen-
dent of cutting depth, cutting speed, tissue resis-
tance and such like. Power output is automatically
adjusted to the level required for cutting.
,
.
,
.
-
,
,
.
200
.
500
,
,
,
,
,
.
-
.
-
-
,
-
-
,
,
-
,
.
,
,
. .
-

Werbung

loading