Herunterladen Diese Seite drucken

Storz AUTOCON II 200 Gebrauchsanweisung Seite 105

Werbung

97
Technische Beschreibung
Technische Daten
Netzanschluss / Power supply /
Netzspannung / Line voltage /
(US/CAN only: if connected to 240 V
center-tapped installation required)
Leistungsaufnahme bei max. HF-Leistung /
Power consumption at max. HF power /
Netzsicherung / Line fuse /
Betriebsart / Operating Mode /
Aussetzbetrieb /
Intermittent operation /
-
Abmessungen / Dimensions /
B x H x T / w x h x d /
x
x
Gewicht / Weight /
Umweltbedingungen für Lager und Transport / Environmental conditions for storage and transportation /
Lagertemperatur / Storage temperature/
Relative Luftfeuchtigkeit / Relative humidity /
Luftdruck / Atmospheric pressure /
Umweltbedingungen für den Betrieb/Environmental conditions for operation/
Temperatur / Temperature /
Relative Luftfeuchtigkeit / Relative humidity /
Luftdruck / Atmospheric pressure /
Akklimatisierung
Lag die Lager- oder Transporttemperatur
des Gerätes bei Temperaturen unter +10 °C,
insbesondere unter 0 °C ist eine Akklimatisie-
rungszeit von ca. 3 Stunden einzuplanen.
Technical description
Technical data
/U
100 – 120 V , 50/60 Hz [20 5322 20C / 20 5322 20C010]
AC
220 – 240 V , 50/60 Hz [20 5322 20 / 20 5322 20-010]
920 VA
100 – 120 V
220 – 240 V
25% relative Einschaltdauer (10 s aktiviert, 30 s deaktiviert) /
25% duty cycle (10 sec. on, 30 sec. off) /
25%
(
., 10
410 mm x 165 mm x 385 mm /
10,0 kg|/|
-10 – 60 °C
.
15 – 95%, nicht kondensierend/non-condensing/
500 – 1080 hPa /
10 – 40°C
.
15 – 80%, nicht kondensierend/non-condensing/
500 – 1080 hPa|/|
Acclimatization
If the temperature during storage or
transportation was below +10°C, and
especially when it was below 0°C, plan for
an acclimatization time of around 3 hours.
[20 5322 20C / 20 5322 20C010]: 2 x T8 A 250V
[20 5322 20 / 20 5322 20-010]:
2 x T4 A 250V
.
. –
, 30
. –
)
+10 °C (
,
0 °C),
,
3
.
-
-
,

Werbung

loading