Other Faults - TR-Electronic CANopen+Multi-Sensor LP-46-K Benutzerhandbuch

11.5 Other faults

Fault
Position skips
of the measuring
system
Printed in the Federal Republic of Germany
01/20/2017
Cause Remedy
Vibrations, impacts and shocks, e.g. on presses, are
dampened with "shock modules". If the error recurs
Strong vibrations
despite these measures, the measuring system must be
replaced.
Use cables with twisted pair wires for data and supply.
Electrical faults
Shielding and wire routing must be performed according to
EMC
the respective field-bus system construction guidelines.
TR - ELA - BA - DGB - 0016 - 04
 TR-Electronic GmbH 2010, All Rights Reserved
Page 183 of 183